Recently, the non-standard CNC press brake GHT 185-4000 developed by G‑Press has completed full assembly and all factory acceptance inspections. It has been properly packed for shipment and officially delivered to our customer in the United States for operation.
As the flagship series under the G‑Press brand, the GHT series is equipped with comprehensive premium configurations, balancing high-speed operation and exceptional bending precision. It is specially designed for sheet metal manufacturers with the most stringent processing requirements. The series is available in standard high-end specifications and also supports in-depth non-standard customization. Targeted development can be carried out to comply with grid standards, on-site working conditions and safety codes of different regions. This unit is a tailor-made bending solution exclusively built for our North American customer.
01 GHT Model Positioning
The GHT is the flagship series of CNC press brakes from G‑Press. Boasting an extensive and complete configuration portfolio, it delivers high-efficiency, high-precision machining to meet customers’ most demanding bending requirements.
Most press brakes on the market adopt welded frames, which are prone to stress deformation and accuracy drift after prolonged service. This machine features a fully bolted frame. Each frame component is precision-machined on imported five-face machining centres with a tolerance of less than 0.02 mm. It is further equipped with a pin-bolt locking assembly (shown in the figure below). Proven by 25 years of market application, it maintains stable accuracy over long-term operation.
02 G-CS Real-Time Dynamic Automatic Crowning Compensation System
The real-time dynamic automatic crowning compensation system collects deformation data of the upper ram and lower frame during bending via high-precision strain pressure sensors according to input parameters including sheet thickness, workpiece length, upper and lower die specifications and machine rigidity, and feeds the data back to the CNC system.
Equipped with a dedicated compensation oil pump and high-precision proportional pressure valve, the system delivers rapid response throughout the bending cycle. It generates real-time, efficient and accurate compensation values without manual intervention, ensuring highly consistent bending angles along the full length of workpieces.
03 REFLEX Side Frame Deformation Automatic Compensation
Most press brakes on the market suffer from side frame deformation under varying bending forces. Such deformation induces reading errors from the linear scales when the upper beam descends, resulting in inconsistent bending angles of finished parts. For this reason, a “bow bracket” is installed beneath the side frame and directly connected to the linear scale, to minimize scale reading deviations caused by side frame distortion.
Before Installation
At the early machine design stage, G-Press developed a unique balanced connection structure through simulation, creating balanced coupling between the side-frame bow bracket and linear scale. It accurately detects side-frame opening deformation and compensates linear scale measurement deviations synchronously, consistently securing measurement precision during bending operations.
After Installation

04 Backgauge System
· GFP-6 (X1+X2+R1+R2+Z1+Z2) Floor-Standing Backgauge
The backgauge adopts the rack-and-pinion drive structure identical to that used on laser cutting machines, featuring high-speed operation and outstanding precision. This mechanism incorporates backlash elimination to avoid machining errors and positioning inaccuracies of the backgauge.
The gears and racks for the X, R and Z axes of the G-Press backgauge are imported Italian components with Class 5 grinding accuracy (Class 5 grinding accuracy = 0.005 mm). The drive system is fitted with an Italy-made Bonfiglioli high-torque worm gear reducer to boost moving torque. This enables rapid braking and positioning even during high-speed travel of the backgauge, improving positioning speed.
X5 Axis with Bevel Positioning Function

05 DSP AP Laser Safety Protection Device
This laser safety protection device for press brakes effectively safeguards operators and prevents hand-crushing injuries and workplace accidents.
The DSP AP model supports a 0 mm switching point setting, ensuring safety without compromising productivity.
All machines are manufactured in compliance with CE standards. Electrical and machine guarding meet relevant requirements to satisfy EU import and export access regulations.
06 Front Sheet Support
· G-FS Following Front Support
· SP Manual Sliding Front Support
07 Hydraulic Clamping System
For frequent die change scenarios, the automatic hydraulic clamping system greatly reduces die change time. Verified tests show it cuts die change time by 40%.
· G-WCSUP
· G-WCINF
08 DELEM 69S
This machine is equipped with the flagship DELEM DA-69S CNC system. It supports 2D/3D graphical programming, automatic calculation of bending sequences and collision simulation prediction, and can connect directly to offline programming software. Boasting fast computing response, the system synchronizes in real time with the G‑CS and REFLEX compensation systems to deliver precise compensation commands. It streamlines programming and commissioning for complex sheet metal workpieces, serving as a powerful control core for high-precision bending.
09 Precision Execution — Delivering High-Performance Bending Solutions Worldwide
From initial requirement communication and custom solution design, mechanical and electrical verification, machine assembly and commissioning, calibration of our two self-developed compensation systems, through to final factory inspection, packing and shipment, the G-Press team rigorously controls every stage to fulfil all customer custom requirements item by item.
As the flagship series of G‑Press, the GHT range comes with a full suite of hardware configurations. Supported by our dual in-house developed G‑CS and REFLEX compensation systems and custom mechanical designs, it addresses key pain points in sheet metal fabrication. With high-speed and high-precision bending performance, it consistently delivers reliable, high-performance bending solutions for global customers.







































































































